Opis
Relej za nivo tekuCine RM35-L-24…240V AC/DC
| range of product |
Zelio Control
|
|---|---|
| product or component type |
Modular measurement and control relays
|
| relay type |
Level control relay
|
| relay name |
RM35L
|
| relay monitored parameters |
Detection by resistive probes
|
| time delay |
Adjustable 0.1…5 s, +/- 10 %
|
| switching capacity in VA |
1250 VA
|
| minimum switching current |
10 mA 5 V DC
|
| maximum switching current |
5 A AC/DC
|
| power consumption |
5 VA AC
|
| measurement range |
250 Ohm…1 MOhm
|
| utilisation category |
AC-12 IEC 60947-5-1
AC-13 IEC 60947-5-1 AC-14 IEC 60947-5-1 AC-15 IEC 60947-5-1 DC-12 IEC 60947-5-1 DC-13 IEC 60947-5-1 |
| reset time |
1750 ms
|
|---|---|
| maximum switching voltage |
250 V AC/DC
|
| [Un] rated nominal voltage |
24…240 V AC/DC 50/60 Hz +/- 10 %
|
| supply voltage limits |
20,4…264 V AC/DC
|
| operating voltage tolerance |
– 15 % + 10 % Un
|
| power consumption |
1,5 W DC
|
| output contacts |
2 C/O
|
| nominal output current |
5 A
|
| delay at power up |
0,6 s
|
| measurement accuracy |
+/- 10 % of the full scale value
+/- 20 % for the HS range |
| repeat accuracy |
+/- 2 % time delay
|
| measurement error |
0.5 %/°C with temperature variation
|
| maximum cable distance between devices |
100 m
|
| sensitivity scale |
0.25…5 kOhm LS (Low Sensitivity)
5…100 kOhm St (Standard Sensitivity) 50…1000 kOhm HS (High Sensitivity) |
| sensitivity adjustment |
5…100 %
|
| maximum supply current for sensors |
1 mA
|
| cable capacitance |
1 nF HS (High Sensitivity) probe cable
2,2 nF St (Standard Sensitivity) probe cable 4,7 nF LS (Low Sensitivity) |
| marking |
CE : 73/23/EEC
CE : EMC 89/336/EEC |
| overvoltage category |
III IEC 60664-1
|
| insulation resistance |
> 500 MOhm 500 V DC between supply and relay output IEC 60255-5
> 500 MOhm 500 V DC between measurement and relay output IEC 60664-1 > 1 MOhm 500 V DC between supply and measurement IEC 60255-5 > 500 MOhm 500 V DC between supply and relay output IEC 60664-1 > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5 > 1 MOhm 500 V DC between supply and measurement IEC 60664-1 |
| [Ui] rated insulation voltage |
250 V IEC 60664-1
|
| operating position |
Any position without
|
| connections – terminals |
Screw terminals, 1 x 0.5…1 x 4 mm² AWG 20…AWG 11) solid without cable end
Screw terminals, 2 x 0.5…2 x 2.5 mm² AWG 20…AWG 14) solid without cable end Screw terminals, 2 x 0.2…2 x 1.5 mm² AWG 24…AWG 16) flexible with cable end Screw terminals, 1 x 0.2…1 x 2.5 mm² AWG 24…AWG 12) flexible with cable end |
| tightening torque |
0,6…1 N.m IEC 60947-1
|
| housing material |
Self-extinguishing plastic
|
| local signalling |
Relay ON LED yellow)
Power ON LED green) Timer ON LED yellow) |
| mounting support |
35 mm symmetrical DIN rail EN/IEC 60715
|
| electrical durability |
100000 cycles
|
| mechanical durability |
30000000 cycles
|
| operating rate |
<= 360 operations/hour full load
|
| safety reliability data |
B10d = 170000
MTTFd = 182.6 years |
| width |
35 mm
|
[accordion-item title=”Original kataloÅ¡ki broj”]
RM35LM33MW
[/accordion-item]
[accordion-item title=”Robna marka”]
SCHNEIDER
[/accordion-item]
[/accordion]
