Description
Sklopka
| range of product |
TeSys K
|
|---|---|
| range |
TeSys
|
| product or component type |
Contactor
|
| product name |
TeSys K
|
| device short name |
LC1K
|
| device application |
Control
|
| contactor application |
Motor control
|
| utilisation category |
AC-3
|
|---|---|
| poles description |
3P
|
| pole contact composition |
3 NO
|
| [Ue] rated operational voltage |
690 V AC 50/60 Hzfor power circuit
<= 690 V AC 50/60 Hzfor signalling circuit |
| [Ie] rated operational current |
20 A at 400 V AC AC-1 for power circuit
16 A at <= 440 V AC AC-3for power circuit |
| control circuit type |
AC 50/60 Hz
|
| [Uc] control circuit voltage |
220…230 V AC 50/60 Hz
|
| motor power kW |
4 kW at 220…230 V AC 50/60 Hz
4 kW at 480 V AC 50/60 Hz 4 kW at 500…600 V AC 50/60 Hz 4 kW at 660…690 V AC 50/60 Hz 7.5 kW at 380…415 V AC 50/60 Hz 5.5 kW at 440 V AC 50/60 Hz |
| auxiliary contact composition |
1 NO
|
| [Uimp] rated impulse withstand voltage |
8 kV
|
| overvoltage category |
III
|
| [Ith] conventional free air thermal current |
20 A at <= 50 °C for power circuit
10 A at <= 50 °Cfor signalling circuit
|
| Irms rated making capacity |
110 A ACfor signalling circuit conforming to IEC 60947
160 A ACfor power circuit conforming to NF C 63-110 160 A ACfor power circuit conforming to IEC 60947 |
| rated breaking capacity |
110 A at 440 V conforming to IEC 60947
80 A at 500 V conforming to IEC 60947 70 A at 660…690 V conforming to IEC 60947 |
| [Icw] rated short-time withstand current |
25 A <= 50 °C >= 15 min power circuit
80 A 1 s signalling circuit 90 A 500 ms signalling circuit 110 A 100 ms signalling circuit 115 A <= 50 °C 1 s power circuit 105 A <= 50 °C 5 s power circuit 100 A <= 50 °C 10 s power circuit 75 A <= 50 °C 30 s power circuit 55 A <= 50 °C 1 min power circuit 50 A <= 50 °C 3 min power circuit |
| associated fuse rating |
25 A gG at <= 440 V for power circuit
25 A aMfor power circuit
10 A gGfor signalling circuit conforming to IEC 60947
10 A gGfor signalling circuit conforming to VDE 0660
|
| average impedance |
3 mOhm at 50 Hz – Ith 20 A for power circuit
|
| [Ui] rated insulation voltage |
690 Vfor signalling circuit conforming to IEC 60947-4-1
690 Vfor signalling circuit conforming to IEC 60947-5-1 600 Vfor signalling circuit conforming to UL 508 600 Vfor power circuit conforming to CSA C22.2 No 14 600 Vfor signalling circuit conforming to CSA C22.2 No 14 690 V for power circuit conforming to IEC 60947-4-1 600 Vfor power circuit conforming to UL 508 |
| insulation resistance |
> 10 MOhmfor signalling circuit
|
| inrush power in VA |
30 VA at 20 °C
|
| hold-in power consumption in VA |
4.5 VA at 20 °C
|
| heat dissipation |
1.3 W
|
| control circuit voltage limits |
0.2…0.75 Uc at <= 50 °C drop-out
0.8...1.15 Uc at <= 50 °C operational
|
| connections – terminals |
Screw clamp terminals 1 cable(s) 1.5…4 mm² – cable stiffness: solid
Screw clamp terminals 1 cable(s) 0.75…4 mm² – cable stiffness: flexible – without cable end Screw clamp terminals 1 cable(s) 0.34…2.5 mm² – cable stiffness: flexible – with cable end Screw clamp terminals 2 cable(s) 1.5…4 mm² – cable stiffness: solid Screw clamp terminals 2 cable(s) 0.75…4 mm² – cable stiffness: flexible – without cable end Screw clamp terminals 2 cable(s) 0.34…1.5 mm² – cable stiffness: flexible – with cable end |
| operating rate |
3600 cyc/h
|
| auxiliary contacts type |
Type instantaneous (1 NO)
|
| signalling circuit frequency |
<= 400 Hz
|
| minimum switching current |
5 mAfor signalling circuit
|
| minimum switching voltage |
17 Vfor signalling circuit
|
| mounting support |
Plate
Rail |
| tightening torque |
1.3 N.m – on screw clamp terminals – with screwdriver Philips No 2
1.3 N.m – on screw clamp terminals – with screwdriver flat Ø 6 mm |
| operating time |
10…20 ms coil de-energisation and NO opening
10…20 ms coil energisation and NO closing |
| safety reliability level |
B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| non overlap distance |
0.5 mm
|
| mechanical durability |
10 Mcycles
|
| electrical durability |
1.3 Mcycles 16 A AC-3 at Ue <= 440 V
|
| mechanical robustness |
Shocks contactor closed, on X axis 10 Gn for 11 ms IEC 60068-2-27
Shocks contactor closed, on Y axis 15 Gn for 11 ms IEC 60068-2-27 Shocks contactor closed, on Z axis 15 Gn for 11 ms IEC 60068-2-27 Shocks contactor opened, on X axis 6 Gn for 11 ms IEC 60068-2-27 Shocks contactor opened, on Y axis 10 Gn for 11 ms IEC 60068-2-27 Shocks contactor opened, on Z axis 10 Gn for 11 ms IEC 60068-2-27 Vibrations contactor closed 4 Gn, 5…300 Hz IEC 60068-2-6 Vibrations contactor opened 2 Gn, 5…300 Hz IEC 60068-2-6 |
| depth |
57 mm
|
| product weight |
0.18 kg
|
| compatibility code |
LC1K
|
[accordion-item title=”Original kataloÅ¡ki broj”]
LC1K1610M7
[/accordion-item]
[accordion-item title=”Robna marka”]
Schneider
[/accordion-item]
[/accordion]
