Description
Softstarter
| range of product |
Altistart 01
|
|---|---|
| product or component type |
Soft starter
|
| product destination |
Asynchronous motors
|
| product specific application |
Simple machine
|
| device short name |
ATS01
|
| network number of phases |
3 phases
|
| [Us] rated supply voltage |
380…415 V – 10…10 %
|
| motor power kW |
11 kW 3 phases 380…415 V
7.5 kW 3 phases 380…415 V |
| IcL starter rating |
22 A
|
| utilisation category |
AC-53B EN/IEC 60947-4-2
|
| current consumption |
110 A at nominal load
|
| type of start |
Start with voltage ramp
|
| power dissipation in W |
124.5 W in transient state
4.5 W at full load and at end of starting |
| assembly style |
With heat sink
|
|---|---|
| function available |
Integrated bypass
|
| supply voltage limits |
342…456 V
|
| supply frequency |
50…60 Hz – 5…5 %
|
| network frequency |
47.5…63 Hz
|
| output voltage |
<= power supply voltage
|
| [Uc] control circuit voltage |
Built into the starter
|
| starting time |
1 s 100
10 s 10 5 s 20 Adjustable from 1 to 10 s |
| deceleration time symb |
Adjustable from 1 to 10 s
|
| starting torque |
30…80 % of starting torque of motor connected directly on the line supply
|
| discrete input type |
Logic LI1, LI2, BOOST stop, run and boost on start-up functions <= 8 mA 27 kOhm
|
| discrete input voltage |
24…40 V
|
| discrete input logic |
Positive LI1, LI2, BOOST < 5 V and <= 0.2 mA > 13 V >= 0.5 mA
|
| discrete output current |
2 A DC-13
3 A AC-15 |
| discrete output type |
Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO |
| discrete output voltage |
24 V 6…30 V open collector logic
|
| minimum switching current |
10 mA 6 V DC relay outputs
|
| maximum switching current |
2 A 250 V AC inductive cos phi = 0.5 20 ms relay outputs
2 A 30 V DC inductive cos phi = 0.5 20 ms relay outputs |
| display type |
1 LED green starter powered up
1 LED yellow nominal voltage reached |
| tightening torque |
0.5 N.m
1.9…2.5 N.m |
| electrical connection |
4 mm screw clamp terminal rigid 1 1…10 mm² AWG 8 power circuit
Screw connector rigid 1 0.5…2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal rigid 2 1…6 mm² AWG 10 power circuit Screw connector rigid 2 0.5…1 mm² AWG 17 control circuit Screw connector flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal flexible without cable end 1 1.5…10 mm² AWG 8 power circuit Screw connector flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal flexible with cable end 2 1…6 mm² AWG 10 power circuit 4 mm screw clamp terminal flexible without cable end 2 1.5…6 mm² AWG 10 power circuit Screw connector flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit |
| marking |
CE
|
| operating position |
Vertical +/- 10 degree
|
| height |
154 mm
|
| width |
45 mm
|
| depth |
131 mm
|
| product weight |
0.56 kg
|
| compatibility code |
ATS01N2
|
| Motor power range AC-3 |
7…11 kW at 380…440 V 3 phases
|
| motor starter type |
Soft starter
|
[accordion-item title=”Original kataloÅ¡ki broj”]
ATS01N222QN
[/accordion-item]
[accordion-item title=”Robna marka”]
SCHNEIDER
[/accordion-item]
[/accordion]
